To Next PageTo Next Page
Need help?Do you have a question about the DURKOPP ADLER M-TYPE 867 and is the answer not in the manual?
General| Type | Industrial Sewing Machine |
|---|---|
| Stitch Type | Lockstitch |
| Max. Stitch Length | 12 mm |
| Needle System | 134-35 |
| Motor | Integrated Direct Drive |
| Clearance under the sewing foot | 20 mm |
| Power Requirements | 220-240 V, 50/60 Hz |
| Sewing System | Single Needle |
| Foot Lift | 20 mm |
| Hook type | Large hook |
| Applications | Heavy-duty sewing, leather, upholstery |
Instructions for threading the needle thread on single and double needle machines.
Step-by-step guide for threading the needle on machines without a short thread cutter.
Step-by-step guide for threading the needle on machines with a short thread cutter.
Specific instructions for threading the needle on subclass -190146.
Detailed guide on adjusting needle-thread tension for optimal stitch formation.
Specific procedures for adjusting needle-thread tension on automotive machine models.
Procedure for adjusting the hook thread tension using the tension spring and adjustment screw.
Detailed steps for replacing the needle on single-needle sewing machines.
Detailed steps for replacing needles on double-needle sewing machines.
Procedure for changing needles on double-needle machines with disconnectable needle bars.
