To Next Page
R
Robert CombsAug 1, 2025
Why is the thread breaking on my DURKOPP ADLER Sewing Machine?
- AAlexander FloresAug 1, 2025
If the thread is breaking on your DURKOPP ADLER Sewing Machine, several factors could be responsible. First, ensure that both the needle thread and hook thread are correctly threaded. A bent or sharp-edged needle can also cause thread breakage, so replace the needle if necessary. Make sure the needle is correctly inserted into the needle bar. The type of thread you're using might be unsuitable, so switch to a recommended thread. Additionally, check the thread tensions, as tensions that are too tight can lead to breakage. Inspect thread-guiding parts like the thread tube, guide, or take-up disk for any sharp edges. Finally, if the throat plate, hook, or spread have been damaged by the needle, have these parts reworked by qualified specialists.
General
