Settings via the software
Operating Instructions 867-M PREMIUM - 00.0 - 02/201570
8.4.1 Quick access function (softkey menu)
Here you have quick access to functions during the sewing
process. You can also assign a function to the upper softkey.
1. Press the lower softkey .
The following information is shown on the display:
Fig. 46: Softkey menu
2. Calling up a function:
• Press the numeric key under the desired function.
or
Assigning a function to the upper softkey:
• Press the numeric key under the desired function and the
upper softkey at the same time.
The function is assigned to the upper softkey and can subse-
quently be called up using this softkey.
3. Press ESC to exit the menu.
Symbol Meaning
Needle position up / down
If sewing is stopped within the seam, the needle is
positioned up or down.
Threading mode
The needle bar moves to the defined position.
The pedal is temporarily locked.
Programming
Programming starts.
Bobbin mode
Press the pedal halfway backwards.
Bobbin mode is ended.
To Next Page
Loading...
