Setup
Operating Instructions 867-M PREMIUM - 00.0 - 02/2015 59
7.12.4 Connecting the controller
Connect the controller as follows:
• Insert the plug of each connecting cable into the sockets on
the back of the controller.
• Connect the controller to the power supply using the power
cable.
1. Connect the controller as specified in the interconnection
diagram, Interconnection diagram, p. 88.
DANGER
Risk of death from electric shock!
Disconnect the power plug before connecting the
controller.
Make sure the power plug cannot be accidentally
plugged back in.
To Next Page
Loading...
Need help?
General
