DURKOPP ADLER 867-M Premium - Switching the Sewing Machine on

Settings via the software
Operating Instructions 867-M PREMIUM - 00.0 - 02/201566
8.2 Switching the sewing machine on
Fig. 42: Display of the firmware and software version
1. Switch the main switch on.
 The display shows the software version:
• On the left of the screen the control panel firmware
• On the right of the screen the controller software version
 The machine performs a reference run:
The display shows the program last used, or manual mode.
Fig. 43: Display of the program last used
Fig. 44: Display in Manual mode
B Softkey menu
+/- No function assigned
Key Function