Need help?Do you have a question about the DURKOPP ADLER 827 and is the answer not in the manual?
General| Brand | DURKOPP ADLER |
|---|---|
| Model | 827 |
| Category | Sewing Machine |
| Language | English |
Step-by-step guide on how to thread the needle thread for single and double needle machines.
Instructions on adjusting pre-tensioner, main tensioner, and supplementary tensioner.
Guide on adjusting the thread regulator for optimal stitch formation.
Instructions on how to wind the hook thread onto the bobbin.
Steps for removing an empty bobbin and inserting a full one.
How to adjust the hook thread tension using the adjustment screw.
Procedure for inserting and changing needles on single-needle machines.
Procedure for inserting and changing needles on double-needle machines.
How to set the stitch length using the setting wheel on the machine arm.
Explanation of the functions of keys on the machine arm keypad.
Details on how to maintain the sewing machine.
Procedures for cleaning and testing the sewing machine head and direct drive.
Details on lubricating the machine head using DA 10 oil.
Steps for performing a sewing test after setting up the machine.
Steps for assembling the sewing machine stand.
Instructions for assembling the individual stand components.
Steps for assembling the table plate to the stand and related components.
Information about different types of sewing drives available.
Instructions for fitting the sewing-drive control unit.
Steps for attaching and aligning the pedal for ergonomic reasons.
Instructions for assembling and fitting the machine head.
How to switch CLASSIC-machines on and off and status of LEDs.
To Next Page
