DURKOPP ADLER 827

7 Sewing
Operating and function sequence:
Sewing process Operation / explanation
Prior to sewing
Starting position
Position material correctly
for starting the seam.
- Pedal in rest position
The machine is at a halt.
Needle up, sewing feet down.
- Pull pedal half-way back.
The sewing feet are raised.
- Push material forward until it touches the needle.
Sewing
- Push pedal forwards and keep it pushed.
Subsequently the machine will continue sewing with the
rotation speed determined by the pedal.
In mid-seam
Interrupt the sewing process
Resume the sewing process
(after releasing the pedal)
- Release pedal (rest position).
The machine halts in the 1
st
position.
The sewing feet are down.
- Push pedal forwards.
The machine sews at the speed of rotation set by
the pedal.
29
321
7 Sewing
Operating and function sequence:
Sewing process Operation / explanation
Prior to sewing
Starting position
Position material correctly
for starting the seam.
- Pedal in rest position
The machine is at a halt.
Needle up, sewing feet down.
- Pull pedal half-way back.
The sewing feet are raised.
- Push material forward until it touches the needle.
Sewing
- Push pedal forwards and keep it pushed.
Subsequently the machine will continue sewing with the
rotation speed determined by the pedal.
In mid-seam
Interrupt the sewing process
Resume the sewing process
(after releasing the pedal)
- Release pedal (rest position).
The machine halts in the 1
st
position.
The sewing feet are down.
- Push pedal forwards.
The machine sews at the speed of rotation set by
the pedal.
29
321
7 Sewing
Operating and function sequence:
Sewing process Operation / explanation
Prior to sewing
Starting position
Position material correctly
for starting the seam.
- Pedal in rest position
The machine is at a halt.
Needle up, sewing feet down.
- Pull pedal half-way back.
The sewing feet are raised.
- Push material forward until it touches the needle.
Sewing
- Push pedal forwards and keep it pushed.
Subsequently the machine will continue sewing with the
rotation speed determined by the pedal.
In mid-seam
Interrupt the sewing process
Resume the sewing process
(after releasing the pedal)
- Release pedal (rest position).
The machine halts in the 1
st
position.
The sewing feet are down.
- Push pedal forwards.
The machine sews at the speed of rotation set by
the pedal.
29
321
7 Sewing
Operating and function sequence:
Sewing process Operation / explanation
Prior to sewing
Starting position
Position material correctly
for starting the seam.
- Pedal in rest position
The machine is at a halt.
Needle up, sewing feet down.
- Pull pedal half-way back.
The sewing feet are raised.
- Push material forward until it touches the needle.
Sewing
- Push pedal forwards and keep it pushed.
Subsequently the machine will continue sewing with the
rotation speed determined by the pedal.
In mid-seam
Interrupt the sewing process
Resume the sewing process
(after releasing the pedal)
- Release pedal (rest position).
The machine halts in the 1
st
position.
The sewing feet are down.
- Push pedal forwards.
The machine sews at the speed of rotation set by
the pedal.
29
321