DURKOPP ADLER 887 User Manual

887
Spezialnähmaschine
Betriebsanleitung
Instruction manual
Postfach 17 03 51, D-33703 Bielefeld • Potsdamer Straße 190, D-33719 Bielefeld
Telefon +49 (0) 521 / 9 25-00 • Telefax +49 (0) 521 / 9 25 24 35 • www.duerkopp-adler.com
D
GB
Ausgabe / Edition: Änderungsindex Teile-Nr./Part.-No.:
06/2008 Rev. index: 00.0 Printed in Federal Republic of Germany 0791 887740

DURKOPP ADLER 887 Specifications

General

Type	Industrial Sewing Machine
Stitch Type	Lockstitch
Motor Power	750 W
Voltage	220-240 V
Frequency	50/60 Hz
Needle System	DBx1
Motor	Direct Drive Motor
Foot Lift	Automatic

Summary

Foreword

General safety instructions

Operating Instructions Class 887

Product description

Details the features and capabilities of the Dürkopp Adler 887 sewing machine.

Designated use

Specifies the intended applications for the 887 sewing machine, focusing on shoe, leather, and upholstery.

Subclasses and sewing equipment

Outlines the different subclasses and corresponding sewing equipment configurations available for the 887 machine.

Optional equipment

Lists available optional accessories and parts that can be added to the sewing machine.

Technical data

Provides key specifications and technical details of the 887 sewing machine, including dimensions and weights.

Machine operation

Covers the fundamental operational procedures for the sewing machine.

Positioning motor Efka DC1600/DA82GA

Information regarding the Efka DC1600/DA82GA positioning motor.

Positioning motor Efka VD552/6F82FA

Information about the Efka VD552/6F82FA positioning motor.

Positioning drive Efka DC1550/DA321G

Information concerning the Efka DC1550/DA321G positioning drive.

Sewing with positioning motor

Details on operating the machine with a positioning motor.

Maintenance

Covers the essential maintenance procedures for the sewing machine.

Installation Instructions Class 887

Scope of delivery

Details the items included in the delivery package for the sewing machine.

General and transport packing

Information regarding general handling and transport packing of the sewing machine.

Assembling the stand

Instructions for assembling the stand components and table top.

Assembly of stand table top

Steps to assemble the table top with the motor mounted on the stand or machine head.

Setting the working height

Guide on how to adjust the working height of the sewing machine table.

Assembling the machine head

Steps for fitting the sewing machine head onto the stand or table.

Fitting and tensioning the V-belt

Instructions for installing and adjusting the tension of the V-belt.

Fitting the belt guards

Guide on how to attach the protective belt guards to the machine.

Setting the pedal

Instructions for correctly positioning and adjusting the foot pedal.

Installation of knee lever and oil pump pipe

Steps for installing the knee lever and the oil pump pipe.

Fitting the proximity switch

Guide on how to mount the proximity switch, usually for positioning motors.

Installation of cables and control panel

Instructions for connecting cables, control panel, and sewing lamp to the machine head.

Electrical connection

Covers the electrical connections required for the sewing machine.

Setting of positioning motor

Procedures for setting the parameters of the positioning motor.

Setting machine positioning

Steps for defining and setting machine positioning parameters.

Checking set positions

How to verify that the machine positioning settings are correct.

Master reset

Procedure for resetting all motor parameters to their default factory values.

Lubrication

Instructions for lubricating the sewing machine according to chapter 11.2 of Part 1.

Sewing test

Steps to perform a sewing test after the machine has been completely set up.