3.3 Setting the working height
–
The stand height is adjustable between 750 and 900 mm.
–
Loosen the screws (1).
–
Set the required table top height and make sure that it is identical
on both sides. To do that, use the scale on the stand feet. Set the
stand height so that it corresponds with the operator ’s body
proportions.
–
Tighten the screws (1).
Caution! Risk of injury!
Failure to adjust the stand height to the operator ’s body proportions
can cause damage to the operator ’s locomotion system.
7
GB
1
To Next Page
Loading...
