6.11 Setting the stitch length
–
Tu rn the button (1) so that the number (2) indicating the required
stitch length in mm is opposite the mark (3).
6.12 Starting up the manually controlled machine with a clutch motor
–
Switch on the motor (1) with a switch (2) – the drive motor operates
permanently.
–
Tr ead the pedal (3). The motor friction clutch gets switched and the
sewing machine starts running.
–
Regulate the sewing speed by the pressure on the pedal (3).
Dependent on this pressure, the clutch slip changes and
subsequently the machine speed as well.
–
Release the pedal (3). The sewing machine stops.
19
GB
2
3
1
1
3
2
To Next Page
Loading...
Need help?
General
