4.5 Installation of knee lever and oil pump pipe
–
Tilt the machine head (1).
–
Lift the foot with the hand lever.
–
Slide the shaft (3) in the lever (4).
–
Screw the screw (5) with the washer (6).
–
Attach the pipe (7) with the clips (8) and install the suction
basket (9).
–
Tilt the machine head and adjust the knee lever (10) according to
the picture.
12
1
4
6
5
3
10°± 5°
10
7
9
8
To Next Page
