6. Machine operation
6.1 Threading the needle thread
Caution! Risk of injury!
Turn off the main switch.
The needle thread may only be threaded with the sewing machine
switched off.
–
Thread the single needle machine according to Fig. If the machine
is equipped for heavy sewing, wind the thread around the pin (1).
6.2 Winding the hook thread
–
Thread the thread according to the picture.
–
Insert the thread under the knife (1) and tear off by pulling in the
arrow direction (2).
–
Fix the bobbin and press the lever (3) in the direction (4).
–
Start the machine up.
–
After the thread winding, slide the thread under the knife again (1)
and tear it off.
–
Insert another bobbin immediately and press the lever (3).
9
GB
1
1234
To Next Page
Loading...
