2. General and transport packing
Caution:
The special sewing machine must be set up by trained specialist
personnel.
If the special sewing machine you have bought is already set up, the
following transport packing must be removed:
–
Safety straps and battens on the machine head, table and stand.
–
Safety block and straps on the sewing drive
3. Assembling the stand
3.1 Assembling the stand components
–
Mount the frame according to the picture. Mount the pedal (1)
provisionally. Its position will be adjusted after the whole machine
is complete.
–
Adjust the screw (2) so that the stand is stable.
4
3
1
2
To Next Page
Loading...
Need help?
General
