DURKOPP ADLER 878-M PREMIUM User Manual (English)

Other manuals for DURKOPP ADLER 878-M PREMIUM

Questions and Answers:

M
Maria DouglasAug 10, 2025
Why is the thread breaking on my DURKOPP ADLER 878-M PREMIUM Sewing Machine?
- W
  Whitney CarrAug 11, 2025
  If your DURKOPP ADLER Sewing Machine experiences thread breaking, several factors could be responsible. Ensure the needle thread and hook thread are correctly threaded. Inspect the needle for any bending or sharp edges, and replace it if necessary. Verify the needle is properly inserted into the needle bar. Confirm you're using the recommended thread type and that the thread tensions aren't too tight. Check for sharp-edged thread-guiding parts and have any damaged throat plate, hook, or spread reworked by specialists.
C
Cody PhamAug 16, 2025
How to fix loose stitches on DURKOPP ADLER 878-M PREMIUM?
- S
  Steven CunninghamAug 17, 2025
  Loose stitches on your DURKOPP ADLER Sewing Machine can occur if the thread tensions are not correctly adjusted for the sewing material, its thickness, or the thread being used. Make sure to check the thread tensions. Also, double-check that the needle thread and hook thread are threaded correctly according to the threading path.
K
Kelly CowanAug 22, 2025
What to do if my DURKOPP ADLER 878-M PREMIUM Sewing Machine is skipping stitches?
- D
  Danielle BellAug 22, 2025
  Missing stitches on your DURKOPP ADLER Sewing Machine can be caused by several issues. First, check that the needle thread and hook thread are correctly threaded. Replace the needle if it's blunt or bent. Ensure the needle is correctly inserted into the needle bar and that you're using the recommended needle strength. Verify the reel stand is assembled correctly and that the thread tensions aren't too tight. Finally, have a qualified specialist rework any damage to the throat plate, hook, or spreader.
B
Brandi BrownAug 29, 2025
Why is the needle breaking on my DURKOPP ADLER 878-M PREMIUM?
- A
  Anna JohnstonAug 29, 2025
  Needle breakage in your DURKOPP ADLER Sewing Machine may occur if the needle strength is unsuitable for the sewing material or the thread being used. To resolve this, use the recommended needle strength appropriate for your materials.
A
Anna DyerSep 3, 2025
How to solve unthreading at seam beginning on DURKOPP ADLER Sewing Machine?
- T
  Tonya KentSep 3, 2025
  To resolve unthreading at the seam beginning on your DURKOPP ADLER Sewing Machine, check the needle thread tension. The issue may arise if the needle thread tension is too firm.

DURKOPP ADLER 878-M PREMIUM Specifications

General

Stitch Type	Lockstitch
Stitch Length	6 mm
Power Requirements	220-240V, 50/60Hz
Flatbed	Yes
Max Sewing Speed	5000 stitches per minute
Needle System	134
Motor Type	Servo Motor
Application	Upholstery