Settings via the software
Operating Instructions 878-M PREMIUM - 02.0 - 02/2018 81
8.5.2 Sewing
1. Press the pedal forwards and sew.
The following information is shown on the display:
Fig. 53: Display when sewing in Automatic mode
The parameter values for the current section are shown on the
display.
The program bar shows the progress of the seam.
The number under the current section shows the number of stitch-
es yet to be completed / the outstanding length of the section.
The program bar shows half the current section in bold.
Fig. 54: Current section
Completed sections are shown fully in bold.
Fig. 55: Completed section
The following table lists the functions that can be performed in the
course of the seam.
Key/Pedal Function
/
Stop forward/back or to the start of the section
/
Correction of the thread tension (only for electronic
tension plate)
The value is saved.
Pedal halfway
back
Raise the top roller
Pedal fully
back
Cut off the thread
The program remains stopped at the cutoff point.
Lower softkey Softkey menu
8.4 Manual mode, str. 74
To Next Page
Loading...
Need help?
General
