Operation
Operating Instructions 878-M PREMIUM - 02.0 - 02/201842
5.9Holding the top roller in the upper position
There is a lever at the back of the machine for holding the top
roller in the upper position.
Fig. 23: Holding the top roller in the upper position with the lever
To hold the top roller in the upper position:
1. Push the lever down.
To cancel the lock:
1. Push the lever up.
You can also use the pedal to cancel the upper position:
1. Press the pedal halfway back as when lifting the top roller.
The lever swivels back up and the lock is removed.
1
2
(1) - Top roller in upper position
(2) - Upper position canceled
Risk of crushing when lowering the top roller!
Do not hold your hands under the top roller when
the upper position is released via the pedal or lever.
CAUTION
To Next Page
Loading...
Need help?
General
