Technical Specifications
8 Operating Instructions 878-M PREMIUM - 02.0 - 02/2018
2.3Proper use
The Dürkopp Adler 878-M PREMIUM is intended for sewing light
to heavy material.
Depending on the subclass the following needle sizes are to be
used:
• Light to moderately heavy material: 70 – 80 Nm
• Moderately heavy material: 90 – 110 Nm
• Heavy material: 120 – 160 Nm
The maximum thickness of the sewing material thickness is
8 mm when pressed together under the top roller.
The machine is intended only for use with dry sewing material.
The sewing material must not contain any hard objects.
The sewing machine is intended for industrial use.
The manufacturer cannot be held liable for any damage
resulting from improper use.
To Next Page
Loading...
Need help?
General
