Settings via the software
Operating Instructions 878-M PREMIUM - 02.0 - 02/201892
8.7 Simplified display menu
Obr. 63: Control panel
Icons in the top line are the same as in the standard menu, icons
in the bottom line have special functions and will be operated with
the keys as follows:
Information
How to choose between the standard and simplified display menu
is available in the Service Instructions.
Key Function
2Start Tack
Switch between off/single/double backtacking. Backtacking
multi icon appears just in case of special sett-up in
backtacking menu. Number of stitches transfers from
backtacking menu also.
3 End Tack
Switch between off/single/double backtacking. Backtacking
multi icon appears just in case of special sett-up in
backtacking menu. Number of stitches transfers from
backtacking menu also.
4 Thread Trim
Range of values: on/off
5 Needle Position
Switch between needle position up/down.
6 Foot Lifting (foot lifting in stitch/after trimming)
After pedal release the foot lifts automatically, after
depressing the pedal is automatically lowered.
To Next Page
Loading...
Need help?
General
