Settings via the software
Operating Instructions 878-M PREMIUM - 02.0 - 02/201890
5. Exit the submenu using ESC or .
The changed values are stored immediately.
6. Exit Edit mode using ESC.
8.6.7 Copying the program
The selected program is copied into a new program number.
1. Press the key.
The softkey menu appears.
Fig. 59: Softkey menu
2. Press the key.
The following display appears:
Fig. 60: Copying the program
The controller displays the next free program number.
Info Screen
Display more information on the display
Speed Corr.
Setting the correction of various sewing parameters
depending on the speed of the machine.
Fabric Thickness
Setting the correction of various sewing parameters
depending on the material thickness.
Symbol Meaning
To Next Page
Loading...
Need help?
General
