DURKOPP ADLER 827 User Manual

1 Product description
The DÜRKOPP ADLER 827 is a special sewing machine for universal
use.
l
It is a flatbed double-lockstitch machine with bottom feed and
needle feed.
l
Depending on the subclass it comes as single or double needle
machine, with electromagnetic thread cutter.
l
Equipped with a large two-pieces vertical hook (with CTB Bobbin).
l
With a maximum of 16 mm fabric clearance when sewing feet are
lifted.
l
The residual thread length after thread trimming is about 15 mm
without short thread trimming device and about 7 mm with short
thread trimming device.
l
A safety clutch prevents a changing of the hook setting or a hook
damage in the case of a thread deflection into the shuttle track.
l
Automatic wick lubricating with an inspection glass on the arm for
machine and hook lubrication.
l
Integrated winder.
2 Designated use
The 827 is a sewing machine designed for sewing light to
medium-heavy material. Such material is generally made of textile
fibers, but it may also be leather. It is used in the clothing industry and
for domestic and motor-vehicle upholstery.
This special sewing machine can also be used to produce so-called
technical seams. In this case, however, the operator must assess the
possible dangers which may arise (with which DÜRKOPP ADLER AG
would be happy to assist), since such applications are on the one
hand relatively unusual and, on the other, so varied that no single set
of criteria can cover them all. The outcome of this assessment may
require appropriate safety measures to be taken.
Generally only dry material may be sewn with this machine. The
material may be no thicker than 10 mm when compressed by the
lowered sewing feet. The material may not contain any hard objects,
since if it does the machine may not be operated without an
eye-protection device. No such device is currently available.
The seam is generally produced with textile-fibre sewing thread of
gauge up to 20/3 NeB (cotton), 20/3 Nm (synthetic).
Before using any other thread the possible dangers arising must be
assessed and appropriate safety measures taken if necessary.
5
1 Product description
The DÜRKOPP ADLER 827 is a special sewing machine for universal
use.
l
It is a flatbed double-lockstitch machine with bottom feed and
needle feed.
l
Depending on the subclass it comes as single or double needle
machine, with electromagnetic thread cutter.
l
Equipped with a large two-pieces vertical hook (with CTB Bobbin).
l
With a maximum of 16 mm fabric clearance when sewing feet are
lifted.
l
The residual thread length after thread trimming is about 15 mm
without short thread trimming device and about 7 mm with short
thread trimming device.
l
A safety clutch prevents a changing of the hook setting or a hook
damage in the case of a thread deflection into the shuttle track.
l
Automatic wick lubricating with an inspection glass on the arm for
machine and hook lubrication.
l
Integrated winder.
2 Designated use
The 827 is a sewing machine designed for sewing light to
medium-heavy material. Such material is generally made of textile
fibers, but it may also be leather. It is used in the clothing industry and
for domestic and motor-vehicle upholstery.
This special sewing machine can also be used to produce so-called
technical seams. In this case, however, the operator must assess the
possible dangers which may arise (with which DÜRKOPP ADLER AG
would be happy to assist), since such applications are on the one
hand relatively unusual and, on the other, so varied that no single set
of criteria can cover them all. The outcome of this assessment may
require appropriate safety measures to be taken.
Generally only dry material may be sewn with this machine. The
material may be no thicker than 10 mm when compressed by the
lowered sewing feet. The material may not contain any hard objects,
since if it does the machine may not be operated without an
eye-protection device. No such device is currently available.
The seam is generally produced with textile-fibre sewing thread of
gauge up to 20/3 NeB (cotton), 20/3 Nm (synthetic).
Before using any other thread the possible dangers arising must be
assessed and appropriate safety measures taken if necessary.
5
1 Product description
The DÜRKOPP ADLER 827 is a special sewing machine for universal
use.
l
It is a flatbed double-lockstitch machine with bottom feed and
needle feed.
l
Depending on the subclass it comes as single or double needle
machine, with electromagnetic thread cutter.
l
Equipped with a large two-pieces vertical hook (with CTB Bobbin).
l
With a maximum of 16 mm fabric clearance when sewing feet are
lifted.
l
The residual thread length after thread trimming is about 15 mm
without short thread trimming device and about 7 mm with short
thread trimming device.
l
A safety clutch prevents a changing of the hook setting or a hook
damage in the case of a thread deflection into the shuttle track.
l
Automatic wick lubricating with an inspection glass on the arm for
machine and hook lubrication.
l
Integrated winder.
2 Designated use
The 827 is a sewing machine designed for sewing light to
medium-heavy material. Such material is generally made of textile
fibers, but it may also be leather. It is used in the clothing industry and
for domestic and motor-vehicle upholstery.
This special sewing machine can also be used to produce so-called
technical seams. In this case, however, the operator must assess the
possible dangers which may arise (with which DÜRKOPP ADLER AG
would be happy to assist), since such applications are on the one
hand relatively unusual and, on the other, so varied that no single set
of criteria can cover them all. The outcome of this assessment may
require appropriate safety measures to be taken.
Generally only dry material may be sewn with this machine. The
material may be no thicker than 10 mm when compressed by the
lowered sewing feet. The material may not contain any hard objects,
since if it does the machine may not be operated without an
eye-protection device. No such device is currently available.
The seam is generally produced with textile-fibre sewing thread of
gauge up to 20/3 NeB (cotton), 20/3 Nm (synthetic).
Before using any other thread the possible dangers arising must be
assessed and appropriate safety measures taken if necessary.
5
1 Product description
The DÜRKOPP ADLER 827 is a special sewing machine for universal
use.
l
It is a flatbed double-lockstitch machine with bottom feed and
needle feed.
l
Depending on the subclass it comes as single or double needle
machine, with electromagnetic thread cutter.
l
Equipped with a large two-pieces vertical hook (with CTB Bobbin).
l
With a maximum of 16 mm fabric clearance when sewing feet are
lifted.
l
The residual thread length after thread trimming is about 15 mm
without short thread trimming device and about 7 mm with short
thread trimming device.
l
A safety clutch prevents a changing of the hook setting or a hook
damage in the case of a thread deflection into the shuttle track.
l
Automatic wick lubricating with an inspection glass on the arm for
machine and hook lubrication.
l
Integrated winder.
2 Designated use
The 827 is a sewing machine designed for sewing light to
medium-heavy material. Such material is generally made of textile
fibers, but it may also be leather. It is used in the clothing industry and
for domestic and motor-vehicle upholstery.
This special sewing machine can also be used to produce so-called
technical seams. In this case, however, the operator must assess the
possible dangers which may arise (with which DÜRKOPP ADLER AG
would be happy to assist), since such applications are on the one
hand relatively unusual and, on the other, so varied that no single set
of criteria can cover them all. The outcome of this assessment may
require appropriate safety measures to be taken.
Generally only dry material may be sewn with this machine. The
material may be no thicker than 10 mm when compressed by the
lowered sewing feet. The material may not contain any hard objects,
since if it does the machine may not be operated without an
eye-protection device. No such device is currently available.
The seam is generally produced with textile-fibre sewing thread of
gauge up to 20/3 NeB (cotton), 20/3 Nm (synthetic).
Before using any other thread the possible dangers arising must be
assessed and appropriate safety measures taken if necessary.
5

DURKOPP ADLER 827 Specifications

General

Brand	DURKOPP ADLER
Model	827
Category	Sewing Machine
Language	English