9 Sewing test
A sewing test must be carried out when setting-up is complete.
–
Insert the mains plug.
Caution: danger of injury !
Tur n off the main switch.
The needle and hook threads may only be threaded with the
sewing machine switched off.
–
Thread the bobbin-winder thread (see operating instructions).
–
Tur n on the main switch.
–
Lock the sewing feet in the up position (see operating
instructions).
–
Fill the bobbin at low speed.
–
Tur n off the main switch.
–
Thread the needle and hook threads (see operating instructions).
–
Select the material to be processed.
–
Carry out the sewing test, first at low speed and then gradually
increasing it.
–
Check that the seams are of the requisite quality.
If not, alter the thread tensioners (see operating instructions).
If necessary the settings given in the servicing instructions should
also be checked and corrected
27
9 Sewing test
A sewing test must be carried out when setting-up is complete.
–
Insert the mains plug.
Caution: danger of injury !
Tur n off the main switch.
The needle and hook threads may only be threaded with the
sewing machine switched off.
–
Thread the bobbin-winder thread (see operating instructions).
–
Tur n on the main switch.
–
Lock the sewing feet in the up position (see operating
instructions).
–
Fill the bobbin at low speed.
–
Tur n off the main switch.
–
Thread the needle and hook threads (see operating instructions).
–
Select the material to be processed.
–
Carry out the sewing test, first at low speed and then gradually
increasing it.
–
Check that the seams are of the requisite quality.
If not, alter the thread tensioners (see operating instructions).
If necessary the settings given in the servicing instructions should
also be checked and corrected
27
9 Sewing test
A sewing test must be carried out when setting-up is complete.
–
Insert the mains plug.
Caution: danger of injury !
Tur n off the main switch.
The needle and hook threads may only be threaded with the
sewing machine switched off.
–
Thread the bobbin-winder thread (see operating instructions).
–
Tur n on the main switch.
–
Lock the sewing feet in the up position (see operating
instructions).
–
Fill the bobbin at low speed.
–
Tur n off the main switch.
–
Thread the needle and hook threads (see operating instructions).
–
Select the material to be processed.
–
Carry out the sewing test, first at low speed and then gradually
increasing it.
–
Check that the seams are of the requisite quality.
If not, alter the thread tensioners (see operating instructions).
If necessary the settings given in the servicing instructions should
also be checked and corrected
27
9 Sewing test
A sewing test must be carried out when setting-up is complete.
–
Insert the mains plug.
Caution: danger of injury !
Tur n off the main switch.
The needle and hook threads may only be threaded with the
sewing machine switched off.
–
Thread the bobbin-winder thread (see operating instructions).
–
Tur n on the main switch.
–
Lock the sewing feet in the up position (see operating
instructions).
–
Fill the bobbin at low speed.
–
Tur n off the main switch.
–
Thread the needle and hook threads (see operating instructions).
–
Select the material to be processed.
–
Carry out the sewing test, first at low speed and then gradually
increasing it.
–
Check that the seams are of the requisite quality.
If not, alter the thread tensioners (see operating instructions).
If necessary the settings given in the servicing instructions should
also be checked and corrected
27
To Next Page
Loading...
Need help?
General
