DURKOPP ADLER 827

5 Assembling the machine head
5.1 Fitting the machine head
–
Fit the machine head 1 into the opening in the table plate.
5.2 Fitting the oil suction tube
–
Remove the plug at the end of the suction tube 3.
–
Put the end of the suction tube 3 into the cover 1.
–
Snap the suction tube in the hose holder 5.
–
Screw the cover 4 to the bed plate.
11
1
521
34
5 Assembling the machine head
5.1 Fitting the machine head
–
Fit the machine head 1 into the opening in the table plate.
5.2 Fitting the oil suction tube
–
Remove the plug at the end of the suction tube 3.
–
Put the end of the suction tube 3 into the cover 1.
–
Snap the suction tube in the hose holder 5.
–
Screw the cover 4 to the bed plate.
11
1
521
34
5 Assembling the machine head
5.1 Fitting the machine head
–
Fit the machine head 1 into the opening in the table plate.
5.2 Fitting the oil suction tube
–
Remove the plug at the end of the suction tube 3.
–
Put the end of the suction tube 3 into the cover 1.
–
Snap the suction tube in the hose holder 5.
–
Screw the cover 4 to the bed plate.
11
1
521
34
5 Assembling the machine head
5.1 Fitting the machine head
–
Fit the machine head 1 into the opening in the table plate.
5.2 Fitting the oil suction tube
–
Remove the plug at the end of the suction tube 3.
–
Put the end of the suction tube 3 into the cover 1.
–
Snap the suction tube in the hose holder 5.
–
Screw the cover 4 to the bed plate.
11
1
521
34