6.14 Sewing-foot pressure
The required sewing-foot pressure is set with the setting wheel 2.
CAUTION !
The material must not ”swim”.
Do not set a higher pressure than is necessary.
–
To increase the sewing-foot pressure = turn the setting wheel 2
clockwise.
–
To decrease the sewing-foot pressure = turn the setting wheel 2
anti-clockwise.
24
1
6.14 Sewing-foot pressure
The required sewing-foot pressure is set with the setting wheel 2.
CAUTION !
The material must not ”swim”.
Do not set a higher pressure than is necessary.
–
To increase the sewing-foot pressure = turn the setting wheel 2
clockwise.
–
To decrease the sewing-foot pressure = turn the setting wheel 2
anti-clockwise.
24
1
6.14 Sewing-foot pressure
The required sewing-foot pressure is set with the setting wheel 2.
CAUTION !
The material must not ”swim”.
Do not set a higher pressure than is necessary.
–
To increase the sewing-foot pressure = turn the setting wheel 2
clockwise.
–
To decrease the sewing-foot pressure = turn the setting wheel 2
anti-clockwise.
24
1
6.14 Sewing-foot pressure
The required sewing-foot pressure is set with the setting wheel 2.
CAUTION !
The material must not ”swim”.
Do not set a higher pressure than is necessary.
–
To increase the sewing-foot pressure = turn the setting wheel 2
clockwise.
–
To decrease the sewing-foot pressure = turn the setting wheel 2
anti-clockwise.
24
1
To Next Page
Loading...
