Maintenance
Operating Instructions 867-M PREMIUM - 00.0 - 02/2015 41
6.2 Checking the oil level
Fig. 22: Oil level indicator
Checking the oil level
1. Check the oil level indicator every day:
Important: The oil level must always be between the minimum
level marking (3) and the maximum level marking (2).
Refilling oil
Pour in oil through the filler opening (1) as required:
1. Switch off the sewing machine at the main switch.
2. Add oil up to but not past the maximum level marking (2).
3. Press the main switch again to turn the sewing machine
back on.
WARNING
Skin damage due to contact with oil!
Oil can cause a rash if it comes into contact with
skin.
Avoid any skin contact with the oil.
If oil has come into contact with your skin, wash
the affected areas thoroughly.
(1) - Filler opening
(2) - Maximum level marking
(3) - Minimum level marking
NOTICE
Machine damage possible due to incorrect oil level.
Too little or too much oil can damage the machine.
Check the oil level on a daily basis, adding enough oil so oil
level is always between the minimum and maximum
markings.
To Next Page
Loading...
Need help?
General
