Operation
Operating Instructions 867-M PREMIUM - 00.0 - 02/201522
5.3 Threading the needle thread
In all machines the thread from the thread reel is fed through the
thread guide and to the machine via the unwinding bracket.
Fig. 4: Thread guide on the unwinding bracket and machine arm
1. Fit the thread reel on the reel stand (2).
2. Insert the thread from the rear to the front through the thread
guide on the unwinding bracket (3).
3. Use a compressed air gun to feed the thread through the thread
guide (1).
WARNING
Risk of injury from needle and moving parts!
Turn off the sewing machine before threading the
thread.
(1) - Thread guide
(2) - Reel stand
(3) - Guide on unwinding bracket
①
②
③
To Next Page
Loading...
Need help?
General
