Technical Specifications
6 Operating Instructions 867-M PREMIUM - 00.0 - 02/2015
2.3 Proper use
The Dürkopp Adler 867-M PREMIUM is intended for sewing light
to heavy material.
Depending on the submodel the following needle sizes are to be
used:
• Light to moderately heavy material: 90 – 110 Nm
• Moderately heavy material: 110 – 140 Nm
• Heavy material: 140 – 180 Nm
The maximum thickness of the sewing material thickness is
10 mm when pressed together under the sewing foot.
The machine is intended only for use with dry sewing material.
The sewing material must not contain any hard objects.
The sewing machine is intended for industrial use.
The manufacturer cannot be held liable for any damage
resulting from improper use.
To Next Page
Loading...
