Operation
Operating Instructions 867-M PREMIUM - 00.0 - 02/2015 25
5.4 Inserting and winding on the hook thread
Fig. 7: Thread guide on the unwinding bracket and machine arm
1. Fit the thread reel on the reel stand (2).
2. Insert the thread from the rear to the front through the thread
guide on the unwinding bracket (3).
3. Use a compressed air gun to feed the thread through the thread
guide (1).
WARNING
Risk of injury from needle and moving parts!
Turn off the sewing machine before threading the
thread.
(1) - Thread guide
(2) - Reel stand
(3) - Guide on unwinding bracket
①
②
③
To Next Page
Loading...
