Settings via the software
Operating Instructions 867-M PREMIUM - 00.0 - 02/2015 79
2. Use / to select the parameter to be changed for the respec-
tive step, and use / to change it.
3. Use to add a new step.
4. Use to delete a step.
8.6.5 Changing further parameters for the current
step
1. Use /to select the field .
2. Press the OK key.
The submenu opens.
3. Use
/ to select the desired parameter.
4. Press the OK key to activate or deactivate the parameter or
use
/ to edit the value and confirm the change by pressing
OK.
Symbol Meaning
Stitch Count
Auto Forward
Max Speed
Seq. End Modes
Start Tack (bartack at the start of a seam)
Dialog box for defining the start bar tack
End Tack (bartack at the end of a seam)
Dialog box for defining the end bar tack
To Next Page
Loading...
