About these instructions
Operating Instructions 867-M PREMIUM - 00.0 - 02/2015 3
1 About these instructions
1.1 Scope of the instructions
These instructions describe the intended use and the setup of the
special sewing machine 867-M PREMIUM. It applies to all sub-
models listed in chapter 2.4 Technical data.
1.2 Applicable documentation
The device contains built-in components from other manufactur-
ers, e.g. drive motors. Each manufacturer has performed a hazard
assessment for these purchased parts and confirmed their design
compliance with applicable European and national regulations.
The proper use of these components is described in each manu-
facturer's instructions.
1.3 Damage during transport
Dürkopp Adler cannot be held liable for any damage during trans-
port. Inspect the delivery immediately upon receiving it.
Report any damage to the last transport manager.
This applies even if the packaging is undamaged.
Leave machines, equipment and packaging material in the con-
dition in which they were found when the damage was discovered.
This will ensure any claims against the transport company.
Report all other complaints to Dürkopp Adler immediately after
receiving the product.
1.4 Limitation of liability
All information in these operating instructions was compiled with
consideration to the state of the art, and applicable standards and
regulations.
The manufacturer accepts no liability for any damage due to:
• Failure to observe the information given in these instructions
• Improper use
• Unauthorized modifications to the machine
• Use of untrained personnel
• Breakage and damage during transport
• Use of unapproved replacement parts
To Next Page
Loading...
Need help?
General
