DURKOPP ADLER 867-M Premium - Controller; Fitting the Controller

Setup
Operating Instructions 867-M PREMIUM - 00.0 - 02/201550
7.7 Controller
7.7.1 Fitting the controller
Fig. 29: Fitting the controller
1. Screw the controller (2) onto the 4 screw holders (3) under the
table top.
2. Clamp the power cable of the controller (2) into the strain relief
mechanism (1).
3. Screw the strain relief mechanism (1) under the table top.
3
2
1
(1) - Strain relief (2) - Controller
(3) - Screw holder