Programming
Service Instructions M-TYPE DELTA - 00.0 - 12/2019 117
19.2.1 Logging in with username and password
Assigning a username and password
To assign a username and password:
1. Create a new user in User Management and assign this user a
username and password.
The user can log in immediately with this login information.
Logging in with username and password
To log in with username and password:
1. Enter username and password.
2. Press .
The user is logged in.
19.2.2 Logging in with a USB key
Assigning a USB key to a user
To assign a USB key to a user:
1. Select a user in User Management or create a new user.
2. Press the item Login with USB key.
A new window opens.
3. Plug the USB key into one of the ports on the control panel.
4. Select the USB key you wish to assign to the user for login purposes.
5. To assign the USB key, press Pair.
The window disappears, and the function Login with USB key is
active.
Logging in with USB key
To log in with a USB key:
1. Plug the assigned USB key into the control panel.
If the USB key has been assigned correctly, the user will be logged
in.
To Next Page
Loading...
Need help?
General
