DURKOPP ADLER D867 M-Type Delta User Manual

Programming
130 Service Instructions M-TYPE DELTA - 00.0 - 12/2019
19.4.3 Setting the Sewing speed parameters
Various settings can be made for the sewing speed. The possibilities are
explained in more detail in the table.
Icon Menu item Value range
Max. Speed
Maximum permissible speed; it can no
longer be exceeded on the operator level.
• Value range
0500 - 4000 [rpm],
depending on subclass
Min. Speed
Minimum speed at which an individual
stitch is made; a lower speed is no longer
possible at operator level.
• Value range
050 - 400 [rpm])
Position speed
The last stitch is made slower during stop-
ping of the sewing procedure.
• Value range
010 – 700 [rpm]
Soft start speed
Reduced sewing speed for the first
stitches when sewing begins to sew on
the material securely
• Value range
0010 - 1000 [rpm])
Number of soft start stitches • Value range
00 - 10
Acceleration
Slope of the acceleration ramp
• Value range
10 - 40 [rpm/ms]
Deceleration
Slope of the deceleration ramp
• Value range
10 - 40 [rpm/ms]
Speed limitation DB3000
Reduction of the speed to 3000 (rpm) in
combination with an activated input signal
• Value range
150-9999 [rpm]
Speed limitation DB2000
Reduction of the speed to 2000 (rpm) in
combination with an activated input signal
• Value range
150-9999 [rpm]

DURKOPP ADLER D867 M-Type Delta Specifications

General

Brand	DURKOPP ADLER
Model	D867 M-Type Delta
Category	Sewing Machine
Language	English