DURKOPP ADLER D867 M-Type Delta User Manual

Programming
134 Service Instructions M-TYPE DELTA - 00.0 - 12/2019
19.4.7 Setting the Sewing foot stroke parameters
Various settings can be made for the sewing foot stroke. The possibilities
are explained in more detail in the table.
2
nd
needle thread tension
State After Thread
Trimming
• Value range
unchanged, off, on
State After Power
On
• Value range
unchanged, off, on
Icon Menu items Value range
NOTICE
Property damage may occur!
In the case of an excessive sewing foot stroke, the machine may be
damaged and, thus, produce unsatisfactory sewing results.
If the machine is at the second sewing foot stroke height, do not
allow it to sew at an excessive speed.
Icon Menu items Value range
Additional thread tension
If the 2
nd
sewing foot stroke is switched on,
the 2
nd
needle thread tension is
automatically activated (except in the case of
material thickness detection).
• Value range
On/Off
Number of stitches 2. stroke off
Number of stitches after which the second
sewing foot stroke is automatically
deactivated.
• Value range
000 - 255
Automatic
Speed level
Speed up to which the
second sewing foot
stroke is automatically
activated.
• Value range
0000 - 4000 [rpm],
depending on
subclass

DURKOPP ADLER D867 M-Type Delta Specifications

General

Brand	DURKOPP ADLER
Model	D867 M-Type Delta
Category	Sewing Machine
Language	English