DURKOPP ADLER D867 M-Type Delta User Manual

Maintenance
Service Instructions M-TYPE DELTA - 00.0 - 12/2019 191
20 Maintenance
This chapter describes maintenance work that needs to be carried out
on a regular basis to extend the service life of the machine and achieve
the desired seam quality.
Maintenance intervals
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
Work to be carried out Operating hours
8 40 160 500
Check the bobbins for wear and damage and replace them
if necessary

Cleaning
Removing lint and thread remnants 
Lubricating
Lubricating the machine head 
Lubricating the hook 
Servicing the pneumatic system (optional)
Adjusting the operating pressure 
Draining the water-oil mixture 
Cleaning the filter element 
Servicing specific components
Cleaning the thread clamp 
Checking the toothed belt 

DURKOPP ADLER D867 M-Type Delta Specifications

General

Brand	DURKOPP ADLER
Model	D867 M-Type Delta
Category	Sewing Machine
Language	English