DURKOPP ADLER D867 M-Type Delta User Manual

Programming
148 Service Instructions M-TYPE DELTA - 00.0 - 12/2019
19.4.21 Setting the Manual bartack parameters
19.4.22 Setting the Jog-Dial parameters
The electronic handwheel can be activated or deactivated.
19.4.23 Setting the Referencing parameters
After the machine was switched on, the stepper motors need to perform a reference run.
Depending on the setting, referencing can be performed automatically or by pressing the
pedal back all the way.
Icon Menu items Value range
Max. Speed
Speed limit in manual bartack
• Value range
150 - 4000
t Change
The waiting time at the turning points
(e.g. for a change of sewing direction) is
set at this point. A short waiting time
ensures consistent seam quality.
• Value range
0 - 1000 [ms]
Icon Menu items Value range
Jog-Dial • Value range
On/Off
Icon Menu items Value range
User start referencing manual • Value range
On/Off

DURKOPP ADLER D867 M-Type Delta Specifications

General

Brand	DURKOPP ADLER
Model	D867 M-Type Delta
Category	Sewing Machine
Language	English