DURKOPP ADLER D867 M-Type Delta User Manual

Programming
178 Service Instructions M-TYPE DELTA - 00.0 - 12/2019
4. Pull off the thread with the thread scale.
5. Change the percentage value (plus or minus) until the scale reads
200 cN.
6. Save the value and exit the menu.
19.8.2 Settings
The Settings parameter is not explained in greater detail here, because
it is closely related to the area of the mechanics. Details on that area can
be found in the Service routine chapter ( p. 14) .
19.8.3 Multi test
This parameter makes it possible to test whether, for example, magnets,
drives, and inputs or outputs are functioning correctly. A list of the neces-
sary allocations can be found in the  Parameter list of the machine.
Icon Menu item Value range
Feed dog Assemble
Position to needle
Feed dog movement
Hook-Needle Timing
Needle bar
Sewing foot stroke Equal sewing foot stroke
Feed Move
Icon Menu items Value range
Test Output  p. 179
Test Input  p. 179
Test Sewing Motor  p. 180

DURKOPP ADLER D867 M-Type Delta Specifications

General

Brand	DURKOPP ADLER
Model	D867 M-Type Delta
Category	Sewing Machine
Language	English