DURKOPP ADLER D867 M-Type Delta

Programming
Service Instructions M-TYPE DELTA - 00.0 - 12/2019 129
Neat Seam Beginning
• Value range
On/Off
Time delay
only visible if Neat Seam
Beginning is activated
• Value range
0000–1000[ms]
Knife Off
only visible if Neat Seam
Beginning is activated
• Value range
000 - 359
Clamp for knife Off
only visible if Neat Seam
Beginning is activated
• Value range
000 - 359
Exhaust On
only visible if Neat Seam
Beginning is activated
• Value range
000 - 359
Exhaust Off
only visible if Neat Seam
Beginning is activated
• Value range
00000 – 99999 [ms]
Icon Menu items Value range