DURKOPP ADLER D867 M-Type Delta

Programming
128 Service Instructions M-TYPE DELTA - 00.0 - 12/2019
Option
Mode of thread clamp
0 = at seam beginning only
1 = seam beginning + during turn back
2 = seam beginning + during sewing foot
lift
3 = seam beginning + during turn back +
sewing foot lift
• Value range
0, 1, 2, 3
PWM Configuration thread clamp
Power supply to the magnet for the
thread clamp
Activation time t1
[ms]
Activation duration of thread
clamp in time period t1.
• Value range
000 – 1000 [%]
Duty cycle t1 [%]
Duty cycle in time period t1.
• Value range
000 – 1000 [%]
Time t2
Activation duration of thread
clamp in time period t2.
• Value range
000 – 1000 [ms]
Duty cycle t2
Duty cycle in time period t2.
• Value range
000 – 1000 [%]
Boost
• Value range
On/Off
Icon Menu items Value range