Programming
Service Instructions M-TYPE DELTA - 00.0 - 12/2019 165
List of possible button functions:
• Bobbin Wind mode
• Bartack suppression/activation
• Manual bartack
• Half stitch
• Whole stitch
• Pointing Position
• Needle high
• Additional thread tension
• Stitch length switching
• Seam Center Guide
• Light barrier
• Operation lock active with contact open
• Quick stroke adjustment
• Switch to next segment
•2
nd
edge guide position (gap)
• Foot lighten position
• Additional fullness
• Tape tension
•Puller
• Operation lock active with contact closed
• Operation lock in seam
• Trigger program selection
• Program selection Bit B0
• Program selection Bit B1
• Program selection Bit B2
• Program selection Bit B3
• Program selection Bit B4
• Program selection Bit B5
• Program selection Bit B6
• Program selection Bit B7
• Program selection Bit B8
• Program selection Bit B9
• Short stitch
•2
nd
edge guide position (height)
•2
nd
edge guide position (gap and height)
• DB3000
• DB2000
• Function module 1
• Function module 2
To Next Page
Loading...
Need help?
General
