What to do if my Dürkopp Adler Controller shows error ER0.7?
If the Dürkopp Adler Controller displays error ER0.7, it could be due to several reasons. First, check the motor connector for bad connections. Second, examine the synchronizer (sensor) and its signal. Third, inspect the machine head for any objects stuck in the motor pulley or any issues preventing smooth rotation. Finally, consider if the sewing material is too thick.
Why does my Dürkopp Adler Controller show error ER0.1?
If your Dürkopp Adler Controller displays error ER0.1, it indicates a power module error or an abnormal overcurrent or voltage occurrence. Check the power module and the power board's overcurrent circuitry.
What to do if Dürkopp Adler Controller shows ER0.4 error?
If your Dürkopp Adler Controller displays error ER0.4, it means high voltage was detected upon power on, or the connected voltage is wrong or too high. Check the AC power supply, ensuring it's not too high, and inspect the power board. Also, check the F1 fuse.
What to do if my Dürkopp Adler Controller displays error ER0.5?
If the Dürkopp Adler Controller displays error ER0.5, it indicates low voltage was detected upon power on, or the connected voltage is wrong or too low. Check the AC power supply to ensure it's not too low, and inspect the power board.
How to fix Dürkopp Adler Controller error ER0.8?
If your Dürkopp Adler Controller displays error ER0.8, it indicates a communication error between the operation box and the CPU interface. Please check the operation box.
What to do if Dürkopp Adler Controller shows error ER0.2?
If your Dürkopp Adler Controller displays error ER0.2, it means there is an E²PROM (IC3) read/write malfunction. Replace the IC3 memory unit.
General| Brand | DURKOPP ADLER |
|---|---|
| Model | HVP-20 Series |
| Category | Controller |
| Language | English |
To Next Page
