Dymo LabelManager 210D User Manual

6
Connecting the Optional Power Adapter
An optional 9 Volt, 1.5 A power adapter can also be used to power the label maker.
Connecting the AC adapter to the label maker disconnects the batteries as a power source.
To connect the power adapter
Plug the power adapter into the power connector on the top, left side of the label maker.
Plug the other end of the power adapter into a power outlet.
x Make sure the label maker power is turned o before
you disconnect the power adapter from the main power
source. Otherwise, your most recent memory settings will
be lost.
Inserting the Tape Cassette
Your label maker comes with one tape cassette. You can
purchase additional tape cassettes from your local
office supply retailer.
To insert the tape cassette
Lift the tape cassette cover to open the tape
compartment. See Figure 3.
x Before using the label maker for
the first time, remove the protective
cardboard insert from the tape exit slot.
See Figure 4.
Insert the cassette with the label facing up
and positioned between the guideposts.
Press firmly until cassette clicks into place.
See Figure 5.
Close the tape cassette cover.
1.
2.
1.
2.
3.
4.
Figure 3
Figure 4
Remove
cardboard insert
Figure 5
Click!
Guideposts
Click!
LM210D_manual_UK-WEU.indd 6 28-06-2007 10:03:37

Dymo LabelManager 210D Specifications

General

Print technology	Direct thermal
Maximum resolution	180 x 180 DPI
Product color	Black, Silver
Keyboard layout	QWERTZ
Tape size	6 mm
Label memory	9 label(s)
Print preview	Yes
Battery type	AA
Number of batteries supported	6
Tape type	D1
Number of fonts	1
Number of styles	7
Number of box types	8
Number of printing lines (max)	2

Weight and Dimensions

Depth	198 mm
Width	224 mm
Height	103 mm