Dymo LabelManager 210D User Manual

12
Creating Fixed-Length Labels
Normally, the length of the label is determined by the length of the text. However, you can
choose to set the length of the label for a specific application. When you choose a fixed
label length, the label text is automatically resized to fit the label. If the text cannot be
adjusted to fit within the fixed label length, a message is displayed showing the smallest
possible label length for this text. You can choose a fixed length label up to 400 mm long.
To make your label a fixed length
Press the 2 key.
Select Label Length and press }.
Select Fixed and press }.
Select the length for your label and press }.
Using Mirror Text
The mirror format allows you to print text which reads from right to left, as you would see
it in a mirror.
To turn on mirror text
Press the 2 key.
Select Mirror and press }.
Select On and press }.
Using Symbols and Special Characters
Symbols, punctuation, and other special characters can be added to your labels.
Adding Symbols
The label maker supports the extended symbol set shown below.
1.
2.
3.
4.
1.
2.
3.
LM210D_manual_UK-WEU.indd 12 28-06-2007 10:03:42

Dymo LabelManager 210D Specifications

General

Print technology	Direct thermal
Maximum resolution	180 x 180 DPI
Product color	Black, Silver
Keyboard layout	QWERTZ
Tape size	6 mm
Label memory	9 label(s)
Print preview	Yes
Battery type	AA
Number of batteries supported	6
Tape type	D1
Number of fonts	1
Number of styles	7
Number of box types	8
Number of printing lines (max)	2

Weight and Dimensions

Depth	198 mm
Width	224 mm
Height	103 mm