Need help?Do you have a question about the Dymo LabelWriter 550 and is the answer not in the manual?
General| Cables included | AC, USB |
|---|---|
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| AC adapter output current | 1.75 A |
| AC adapter output voltage | 24 V |
| Color | - |
| Print technology | Direct thermal |
| Maximum resolution | 300 x 300 DPI |
| Maximum printing width | 56 mm |
| Certification | CE/GS/FCC ID/IC/RCM |
| Sustainability certificates | REACH, RoHS |
| Storage temperature (T-T) | -18 - 60 °C |
| Operating temperature (T-T) | 4 - 40 °C |
| Operating relative humidity (H-H) | 20 - 95 % |
| USB port | Yes |
| Ethernet LAN | No |
| USB 2.0 ports quantity | 1 |
| Connectivity technology | Wired |
| Product color | Black, Grey |
| Harmonized System (HS) code | 84433210 |
Weight and Dimensions| Depth | 187 mm |
|---|---|
| Width | 127 mm |
| Height | 136 mm |
| Weight | 640 g |
Device compliance with FCC Rules, subject to conditions on interference and operation.
Register your product online to receive news and updates; requires serial number.
Download and install DYMO Connect for Desktop labeling software from support.dymo.com.
Steps to connect the DYMO power adapter and cord to the printer and power outlet.
Instructions for connecting the printer via USB or wired LAN after software installation.
Detailed steps for correctly loading an authentic DYMO LW label roll into the printer.
Details the 2-year warranty for defects and conditions for repair or replacement.
Guidance on obtaining assistance for defective products via the DYMO website or Help Desk.
To Next Page