Dymo LabelWriter Print Server User Manual

Managing the LabelWriter Print Server
20
The server information is now displayed in a separate pane under the servers list.
About the Print Server Web Pages
From the Print Server Web pages, you can:
• View server status.
• Change the configuration.
• Change the administrator name and password.
• Upgrade the firmware.
• Restart the server.
• Reset the server to factory default settings.
Note The Print Server Web pages are only available in English.
To access the Print Server Home Page
1 Open the Print Server Control Center.
2 Select the print server you want to access from the servers list.
3 Click Open Print Server Home Page (Windows) or Go to Home Page (Mac OS)
on the toolbar.
Note You can also access the print server home page by entering the IP address for the print
server in the address bar of your Web browser.
Viewing the Print Server Status
The print server status page displays the print server status and TCP/IP configuration.
To view print server status
♦ Click Status at the top of the Print Server home page.

Dymo LabelWriter Print Server Specifications

General

Networking standards	-
Network connection type	Ethernet LAN
Interface	USB
Customs code	8443321000
Network ready	Yes
Minimum system requirements	CD-ROM
USB 2.0 ports quantity	1
Package type	Box
Package depth	235 mm
Package width	175 mm
Package height	68 mm
Package weight	390 g
Internal	No
Country of origin	Taiwan
Mac operating systems supported	Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Windows operating systems supported	Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64