Dymo LabelWriter Print Server User Manual

3
Chapter 2
Installing the LabelWriter Print Server
This chapter describes how to install and configure the print server.
To install the print server
1 Make sure that you have everything you need to get started.
2 Connect the cables.
3 Install the LabelWriter Control Center software.
4 Configure the print server.
5 Add the printer to your computer.
See Chapter 3, Adding a Printer for instructions on adding a printer on your specific
operating system.
Getting Started
Once you have unpacked your print server, make sure that you have all of the items shown here.
In addition to the items that come with the print server, you will need the following:
• A LabelWriter 400 or later series printer, with power adapter and USB cable
• Installed LabelWriter printer drivers (included in the DYMO Label Software installation)
• A standard Ethernet cable (available from your local office supply and other retailers)
• A working Ethernet connection to your Local Area Network
POWER LINK ACTIVE USB
LabelWriter Print Server
CD-ROM
Power adapter

Dymo LabelWriter Print Server Specifications

General

Networking standards	-
Network connection type	Ethernet LAN
Interface	USB
Customs code	8443321000
Network ready	Yes
Minimum system requirements	CD-ROM
USB 2.0 ports quantity	1
Package type	Box
Package depth	235 mm
Package width	175 mm
Package height	68 mm
Package weight	390 g
Internal	No
Country of origin	Taiwan
Mac operating systems supported	Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Windows operating systems supported	Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64