Dymo LabelWriter Print Server User Manual

About the LabelWriter Print Server
2
System Requirements
The print server requires a standard Ethernet connection and one of the following:
• Windows
®
XP 32-bit
• Windows Vista
®
32 or 64-bit
• Windows
®
7
• Mac OS
®
X v10.4 or later (LabelWriter Duo requires Mac OS X v10.5 or later)
• Linux (Linux is not officially supported. See "Adding a Printer in Linux" on page 16 for
more information)
Using this Guide
This User Guide provides instructions for the DYMO LabelWriter print server on the Windows,
Macintosh, and Linux platforms. For the most part, the software operates in the same way on all
platforms. Any differences in features, procedures, or commands are noted within the text.
This User Guide includes information for installing and using the print server with a DYMO
LabelWriter printer. Depending on the model of DYMO printer you are using, some sections of this
User Guide may not apply to you. The following table provides a summary of the contents.
User Guide Chapter Description
About the LabelWriter
Print Server
This chapter gives an overview of the print server.
Installing the
LabelWriter Print
Server
This chapter describes how to install and configure the print server, install
the Print Server Control Center software, and add a LabelWriter printer to
your computer.
Managing the
LabelWriter Print
Server
This chapter includes information about the Print Server Control Center
software. This includes information on changing the server configuration and
upgrading the firmware.
Getting Help
This chapter offers suggestions for resolving problems that can occur when
using the print server. If you are unable to solve a problem, this chapter also
describes how to contact DYMO Technical Support.
Technical and
Certification
Information
This chapter contains technical and certification information for the print server.

Dymo LabelWriter Print Server Specifications

General

Networking standards	-
Network connection type	Ethernet LAN
Interface	USB
Customs code	8443321000
Network ready	Yes
Minimum system requirements	CD-ROM
USB 2.0 ports quantity	1
Package type	Box
Package depth	235 mm
Package width	175 mm
Package height	68 mm
Package weight	390 g
Internal	No
Country of origin	Taiwan
Mac operating systems supported	Mac OS X 10.3 Panther, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion
Windows operating systems supported	Windows Vista Business, Windows Vista Business x64, Windows Vista Home Basic, Windows Vista Home Basic x64, Windows Vista Home Premium, Windows Vista Home Premium x64, Windows Vista Ultimate, Windows Vista Ultimate x64, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64