Dymo LabelWriter Print Server - Adding a Printer in Windows Vista

Adding a Printer in Windows Vista
11
Adding a Printer in Windows Vista
This section describes how to add a LabelWriter printer in Windows Vista.
When adding a LabelWriter Duo printer, you will need to create separate ports for the Label printer
and the Tape printer. Each port must have a unique name.
To add a LabelWriter printer
1 Click Start, and then click Control Panel.
2 Under Hardware and Sound, click Printer.
3 Click Add a Printer.
The Add Printer dialog box appears.
4 Click Add a local printer.
5 On the Choose a printer port
page, do the following:
a. Select Create a new port.
b. Choose Standard TCP/
IP Port from the Type of
port list.
c. Click Next.
6 On the Type a printer
hostname or IP address page,
do the following:
a. Enter the IP address that
you obtained when
configuring the print
server in the Hostname or
IP Address field.
The port name is filled in
automatically.
b. (Optional) Enter a new
name for the port in the
Port name field.
When adding a
LabelWriter Duo printer,
you must give the Label printer port and the Tape printer port different names.
c. Click Next.