EasyManua.ls Logo

Dyna-Glo DGP552SSN-D - User Manual

Dyna-Glo DGP552SSN-D
87 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
Rev. 06/07/2019
5 BURNER PREMIER
NATURAL GAS GRILL
WITH SIDE BURNER
Model #DGP552SSN / DGP552SSN-D /
DGP552CSN /DGP552CSN-D / DGP552GSN /
DGP552GSN-D / DGP552MSN / DGP552MSN-D
ATTACH YOUR RECEIPT HERE
Serial Number _____________________________ Purchase Date ______________________
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m., CST, Monday – Friday
or e-mail us at customerservice@ghpgroupinc.com.
Français p.
XX
Español p.
XX
Français p. 30
Español p. 59

Table of Contents

Questions and Answers

  • H
    heather17Jul 29, 2025
    What to do if my Dyna-Glo DGP552SSN-D Grill burner won't light with a match?
    • B
      Brandon GreenJul 29, 2025
      If the burner on your Dyna-Glo Grill won't light with a match, there are a few potential causes. First, ensure the match is reaching the burners by using the match holder found in the cabinet door. Also, check that the natural gas supply shut-off valve is open. Another possible cause is a poor connection between the gas hose plug fitting and sleeve coupling; turn off the grill knobs, close the gas supply shut-off valve, and check this connection, disconnecting and reconnecting if necessary. Finally, the burner inlet may be blocked, so clean the burner inlet (venturi) and burner as described in the Care and Maintenance section.
  • B
    Bill DonovanAug 4, 2025
    How to fix a Dyna-Glo DGP552SSN-D burner that won't light with ignitor?
    • S
      Susan ScottAug 4, 2025
      If the burner on your Dyna-Glo Grill won't light using the ignitor, it could be due to a few reasons. The igniter electrode may be covered with grease or residue, so try cleaning the ignitor electrode. Another possibility is that the igniter electrode has a loose or disconnected wire; check the connection and reconnect any loose or disconnected wires. Lastly, the ignition electrode may be cracked or broken; in this case, replace the ignition electrode.
  • M
    Mary BakerAug 9, 2025
    Why is my Dyna-Glo DGP552SSN-D Grill producing low heat?
    • K
      Kelsey RosalesAug 9, 2025
      Low heat on your Dyna-Glo Grill can be caused by insufficient gas pressure to the unit. It is recommended to call a qualified service agency to check the gas supply pressure and correct the pressure.
  • J
    Jeffrey ClarkAug 15, 2025
    Why does my Dyna-Glo DGP552SSN-D Grill have excessive flare ups?
    • C
      campostonyaAug 15, 2025
      Excessive flare-ups in your Dyna-Glo Grill can occur due to several reasons. One common cause is grease and residue buildup on the heat tents or in the firebox, so cleaning the grill components is recommended. Another reason might be excessive dripping of fat or marinade from food; trimming the fat from meat and using non-oil-based marinades can help. Finally, the cooking temperature may be too high, so lowering the temperature accordingly is advised.
  • K
    Kara FarleyAug 21, 2025
    What to do if there is no gas flow in my Dyna-Glo Grill?
    • W
      wunderwoodAug 22, 2025
      If you're experiencing no gas flow or an obstructed gas flow in your Dyna-Glo Grill, start by checking that the natural gas supply shut-off valve is open. Also, a poor connection between the gas hose plug fitting and sleeve coupling can cause this issue; turn off the grill knobs, close the gas supply shut-off valve, and check the connection, disconnecting and reconnecting if necessary. Finally, the burner inlet might be blocked, so clean the burner inlet (venturi) and burner as described in the Care and Maintenance section.

Summary

Assembly Instructions - Cart Frame

Cart Assembly Steps

Assembly Instructions - Doors and Hood

Install Doors and Hood Handle

Assembly Instructions - Grill Body and Side Burner

Mount Grill Body and Side Burner

Mounting the main grill body, side tables, and side burner assembly.

Assembly Instructions - Burner and Control Panel

Install Burner and Control Panel

Attaching the side burner control panel, valve, and ignition wire.

Gas Connection and Leak Testing

Connecting the Gas Supply

Procedures for safely connecting the natural gas supply line to the grill.

Performing a Leak Test

Procedure for checking gas connections for leaks using a soap solution.

Operation Instructions

Lighting and Shutdown Procedures

Troubleshooting

Common Issues and Solutions

Addresses problems like ignition failure, low heat, gas flow, and flare-ups.

Warranty Information

Warranty Coverage and Claims

Dyna-Glo DGP552SSN-D Specifications

General IconGeneral
BrandDyna-Glo
ModelDGP552SSN-D
CategoryGrill
LanguageEnglish

Related product manuals