EasyManua.ls Logo

Dyna-Glo DGP483SSN-D - User Manual

Dyna-Glo DGP483SSN-D
87 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
190802
4 BURNER PREMIER
NATURAL GAS GRILL
WITH SIDE BURNER
Model #DGP483SSN / DGP483SSN-D /
DGP483CSN / DGP483CSN-D / DGP483GSN /
DGP483GSN-D / DGP483MSN / DGP483MSN-D
ATTACH YOUR RECEIPT HERE
Serial Number _____________________________ Purchase Date ______________________
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-447-4768, 8:00 a.m. – 4:30 p.m., CST, Monday – Friday
or e-mail us at customerservice@ghpgroupinc.com.
Français p.
XX
Español p.
XX
Français p. 30
Español p. 59

Table of Contents

Questions and Answers

  • V
    Veronica FowlerAug 9, 2025
    What to do if my Dyna-Glo DGP483SSN-D Grill burner will not light with a match?
    • C
      Christina LozanoAug 9, 2025
      If the burner on your Dyna-Glo Grill won't light with a match, consider these possibilities: 1. The match may not be reaching the burners. Use the match holder found in the cabinet door. 2. The gas supply may be shut off. Check that the natural gas supply shut-off valve is open. 3. There might be a poor connection between the gas hose plug fitting and sleeve coupling. Turn off the grill knobs, close the gas supply shut-off valve, and check the connection. Disconnect and reconnect if needed. 4. The burner inlet could be blocked. Clean the burner inlet (venturi) and burner as described in the Care and Maintenance section.
  • J
    jwallaceAug 17, 2025
    What to do if my Dyna-Glo Grill has no gas flow or an obstructed gas flow?
    • K
      Kristin RodriguezAug 17, 2025
      If your Dyna-Glo Grill has no gas flow or an obstructed gas flow, here are a few things to check: * The gas supply may be shut off. Ensure the natural gas supply shut-off valve is open. * There could be a poor connection between the gas hose plug fitting and sleeve coupling. Turn off the grill knobs, close the gas supply shut-off valve, and check the connection. Disconnect and reconnect if necessary. * The burner inlet might be blocked. Clean the burner inlet (venturi) and burner as described in the Care and Maintenance section.
  • K
    kathygibbsAug 25, 2025
    How to fix a Dyna-Glo Grill burner that won't light using the ignitor?
    • K
      Karen MillerAug 26, 2025
      If the burner on your Dyna-Glo Grill doesn't light using the ignitor, it could be due to: * The igniter electrode being covered with grease or residue. Clean the ignitor electrode. * A loose or disconnected wire on the igniter electrode. Check the connection and reconnect any loose or disconnected wires. * A cracked or broken ignition electrode. Replace the ignition electrode (see Replacement Parts List).
  • J
    Jamie MyersSep 1, 2025
    Why does my Dyna-Glo DGP483SSN-D have excessive flare ups?
    • M
      Mathew Marshall MDSep 1, 2025
      Excessive flare-ups in your Dyna-Glo Grill can occur due to: * Grease and/or residue build-up on heat tents or in the firebox. Solution: Clean the grill components. * Excessive dripping of fat or marinade from food. Solution: Trim the fat from meat and use non-oil based marinades. * Cooking temperature being too high. Solution: Lower the temperature accordingly.

Summary

SAFETY INFORMATION

DANGER

Safety warning regarding explosive atmospheres and combustible materials.

WARNING

California Proposition 65 warning about chemicals in fuel and combustion products.

SAFETY GUIDELINES

WARNING: Clearances

Mandatory clearance and installation guidelines for safe grill placement.

CAUTION: Safe Operation

ASSEMBLY STEP 1-2

ASSEMBLY STEP 3-4

ASSEMBLY STEP 5-6

ASSEMBLY STEP 7-8

ASSEMBLY STEP 9-10

Mount Grill Body

ASSEMBLY STEP 11-12

Install Gas Hose Holders

ASSEMBLY STEP 13-14

Attach Right Side Table

ASSEMBLY STEP 15-16

Connect Side Burner Components

ASSEMBLY STEP 17-18

ASSEMBLY STEP 19-20

CONNECTING TO NATURAL GAS

Installation Requirements

Details agency installation, shut-off valve requirements, and pressure testing protocols.

Connecting the Grill

Step-by-step instructions for connecting the grill to the natural gas supply line.

GAS LEAK CHECK AND SAFETY

Perform Leak Test

Procedure for preparing and performing a leak test using soap solution.

Critical Safety Warnings

Warnings regarding hose assembly, leak detection, and preventing fire/damage.

OPERATION: LIGHTING AND SAFETY

Lighting The Grill

Initial burn-off procedure and steps for lighting the grill using the igniter.

Operation Precautions

Cautionary notes regarding flame extinguishing and warnings about pot use on side burner.

OPERATION: MATCH LIGHTING AND SHUTDOWN

Match Lighting Guide

Illustrated guide for lighting main and side burners using a match.

SHUTDOWN INSTRUCTIONS

Procedure for safely turning off the grill and closing the gas supply.

TROUBLESHOOTING

Burner Ignition Issues

Diagnosing and correcting problems with the igniter or spark generation.

Low Heat Causes

Flare Up Solutions

TROUBLESHOOTING COMMON PROBLEMS

Burner Wont Light With Match

Troubleshooting steps for lighting burners using a match.

Gas Flow Obstructions

Diagnosing and resolving issues with gas flow or obstructed burner inlets.

Dyna-Glo DGP483SSN-D Specifications

General IconGeneral
TypeGas Grill
Cooking Area483 sq. in.
Burners3
MaterialStainless Steel
Fuel TypePropane
BurnerStainless Steel
BTU Output36, 000 BTU

Related product manuals