8 Instruction Manual for Safety and Comfort
Power
Do not disassemble, modify, tamper with or repair your
product
■ Do not attempt to disassemble, modify, tamper with or repair product
(including AC adaptor). Disassembly, modification, tampering or
repairing your product could cause fire or electric shock, possibly
resulting in serious injury.
Please contact an authorized Toshiba service provider for any repair
service.
Disconnect the power cable/cord before moving your product
■ Before moving your product, shut down your product, disconnect the
power cable/cord and wait until your product cools down and if the
power button has a lock, set it to the lock position. Failure to follow this
instruction may cause excessive force to be applied to the connector
section, which could cause a product failure or fire, possibly resulting in
serious injury.
Handling the AC adaptor power cables/cords or plugs
■ When handling the power cable/cord, follow these precautions:
■ Never tamper with the power cable/cord or plug.
■ Never splice or alter a power cable/cord.
■ Never bend or twist a power cable/cord.
■ Never pull on a power cable/cord to remove a plug from a socket.
Always grasp the plug directly.
■ Never place heavy objects on a power cable/cord.
■ Never run a power cable/cord through a pinch point such as a door
or window.
■ Never place a power cable/cord near a heat source.
■ Never use nails, staples or similar objects to fasten or attach cord in
place.
■ Never attempt to disassemble or repair an AC adaptor.
Doing any of the above may damage the cables, and/or result in a fire
or electric shock, possibly resulting in serious injury.
To Next Page
Loading...
Need help?
General
